15
GPD-40 Fence Pro™ Service Instructions... continued
the anti-vibration springs into the handle
tubes. Assemble the handle tubes into the
upper handle cups. Insert the chuck tube
into the post driver body, taking care to
insert the handle tubes into the handle
cups on the lower driver body. When parts
are inserted in the proper position, there
will be resistance from the anti-vibration
springs to seat the lower driver body on to
the post driver body. This is normal. Ap-
ply primer and threadlocker to the bolts.
Insert and hand thread the four (4) Lower
body bolts through the lower driver body
into the post driver body. Use a 1/4
″
hex
wrench to tighten the bolts in a star pat-
tern until the lower driver body is seated
on the post driver body. Check for any
misalignment or binding when joining the
parts. Do not use excessive force. Torque
the lower body bolts to 132
inch/pounds
.
Perform a visual check of the post driver.
Reconnect the spark plug wire to the spark
plug. Check that the engine has the proper
amount of oil. Start the engine using the
proper procedure and test the post driver.
