RHINO GPD-40 Fence Pro Owner'S Manual Download Page 22

20

Rhino

®

 Limited Lifetime Warranty

Gasoline Powered Post Drivers

Warranty:

 Rhino Tool Com-

pany, Inc. (“Rhino”) warrants 

to the original purchaser, 

purchasing the Equipment 

in new condition, in original 

packaging from an autho

-

rized dealer that its Gasoline 

Powered Post Driver will be free from defects in workmanship and 

materials (the “Limited Warranty”).  The Limited Warranty shall 

survive for the lifetime of the product with respect to the Hammer 

and Anvil components and for twelve (12) months with regard to 

all other components, excluding the Honda GX35 engine for which 

Rhino provides no warranty and for which the warranty provided 

by American Honda Motor Co., Inc. shall be the sole warranty ap

-

plicable thereto. This Limited Warranty is non-transferable.
For Warranty Claims contact your dealer or distributor. Proof of 

purchase date and serial number is required. In the event of a 

warranty repair, the post driver should be returned to a Registered 

and Warranty Authorized Rhino Servicing Dealer. Rhino’s obliga

-

tion under this Limited Warranty is expressly limited to the repair 

or replacement, at Rhino’s election, of such defective Gasoline 

Powered Post Driver, which is proved to be defective upon inspec

-

tion by a Rhino-certified/authorized technician.  
This Limited Warranty does not extend to a Gasoline Powered 

Post Driver which has been subject to misuse, neglect, or ac

-

cident, nor does it extend to any Gasoline Powered Post Driver 

which has been repaired, altered, or serviced by unauthorized 

persons.  This Limited Warranty does not cover any damage or 

adjustments required to any Gasoline Powered Post Driver if such 

damage or adjustment is caused by the use of supplies, parts, or 

attachments not sold or approved by Rhino.  

EXCEPT AS OTHERWISE PROVIDED HEREIN, RHINO DIS-

CLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRAN-

TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU-

LAR PURPOSE.

  UNDER NO CIRCUMSTANCES SHALL RHINO 

BE LIABLE FOR ANY LOSS OF BUSINESS, REVENUES, OR 

PROFIT OR OTHER INDIRECT, INCIDENTAL, SPECIAL OR 

CONSEQUENTIAL DAMAGES OR LOSS ARISING OUT OF ANY 

DEFECTS IN OR PERFORMANCE OF THE GASOLINE POW

-

ERED POST DRIVER, HOWSOEVER CAUSED.  

To register your product: 

Fill out and mail in registration card supplied with post driver

Or

 online visit:

 

http://rhinotool.com/contact-support/warranty-information/

L I M I T E D

Summary of Contents for GPD-40 Fence Pro





























Reviews: