RHINO FC-0007, Operator'S Manual

Page: 95 / 160

OPERATION
SE6 05/05 Operation Section 4-3
© 2005 Alamo Group Inc.
OPERA
T
ION
Standard Equipment and Specifications
SE6
Horsepower Required 30-50 HP
Cutting Capacity (Max.) 1”
Cutting Height 1-7/8” Min.
Safety Deflector Std.
Cutting Width 72”
Overall Length 107-3/4”
Weight (Approx.) 728 lbs
Hitch CAT I (lift), Clevis (pull)
Blade Carrier Pan
Blade Tip Speed (FPM) 14,930
Gearbox Rating:
540 RPM 65 HP*
Output Shaft Diameter 1-9/16”
Driveline Size Cat 3
Deck Thickness 10 Ga.
Side Skirt 10 Ga. x 8”
Transport Width 78-5/8”
Jack Stand Std. (pull)
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific size
vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut
vegetation above the Mower’s rated capacity or to cut any type of non-vegetative material. Only
operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an
application for which it is not designed and/or operating the Mower with the wrong size Tractor can
cause Mower component damage and equipment failure resulting in possible serious injury or
death.
(SGM-14)