RHINO MOTION CONTROLS
RMCS-1110
Hybrid Servo Driver with Modbus RTU communication
(Max. 80Vdc and 7A per phase)
Page 3
Hybrid AC Driver [RMCS-1110]
date of purchase. Please see the section on service, support and warranty at the end of this document.
Technical Specifications
Specification
Min
Max
Units
Comments
Supply Voltage
18
80
Volts DC
BVe and GND
Phase Current
0.5
7
Amps
As demanded by load
Servo Loop Speed
500
1000
Hz
Power Dissipation
0
15
Watts
—
Short-Circuit Current
7
10
Amps
In case of motor terminal short
PUL and DIR Voltage
2.5
7
Volts DC
B and – input pins
Ambient Temp.
0
70
Celsius
Humidity
0
95%
Non condensing
Step Frequency
—
200
kHz
Direction Setup time
500
—
ns
Steps is clocked on positive edge
Mechanical Specifications
Specification
Details
Dimensions (L * W * H)
110mm * 77mm *33mm
Weight
155gms
Heat Sink
Anodized Aluminum 3mm thickness
Mounting Screw Holes
3.6mm minimum diameter
