Diagram 7c
Closing the book
Place the book so the open end of the wire is firmly pressed against the back
plate (6)
inside the closing machine. The narrow
loop
(7) should be on the
top of the book while pushing the book against the back plate. Hold the book
with your left hand as you pull the
handle (8)
down with your right hand.
Inspect the close and readjust the wire if necessary. When the wire is closed
properly, the narrow loop overlaps the wide loop by about 1/16" along the
entire length of the book. An indication that the wire is not closed tight enough
is when the covers or sheets fall out of the book.
Diagram 7d
Summary of Contents for OD 3500
