Rhin-O-Tuff OD 3500, Instruction Book

Page: 8 / 30

enough so the punch pin can be removed. Pull the pin straight up through the die
retainer. Reinstall the die using die installation procedure.
+ Die maintenance:
Die maintenance can be performed with the die installed in the machine. To
perform the die maintenance, loosen the
safety screw (4) on the top front cover
and raise it up so it stays open. Using the oil provided with the machine, squeeze
the plastic bottle over the oil slot that runs the entire length of the die. To much oil
can run onto the paper being punched. After oiling,
always punch scrap paper
to remove excess oil.
5) Setting the paper guides: Diagram 2
The paper guide (1) is located on the top hinged cover. By loosening the knob
(2) counterclockwise, the guide can be adjusted to the left or the right so the
holes can be centered within the paper being punched. For 11” sheets, the right-
hand portion of the guide can be set at the 11” mark (3) (thick vertical line).
This patented feature will allow all the 11” sheet sizes to be perfectly centered in
the sheet no matter which punch pattern is being used. When using different
length sheets, the paper guide will have to be moved to a different position,
Diagram 2