Setup Instructions: Diagram 7a, 7b, 7c & 7d
a) Determine the correct wire size.
Use the table below to determine the correct wire size for the book thickness.
You can insert more sheets into the wire, but it may affect the appearance of
your book. Covers are not included with the number of sheets column.
Wire Diameter Book Thickness Number of sheets
Inch
Inch 20lb
8Oasm
3/16
1/8
30
1/4
6.4 3/16
4.8 45
5/16
7.9 1/4
6.4 65
3/8
9.5 5/16
7.9 80
7/16
11.1 3/8
9.5 95
1/2
12.7 7/16
11.1 110
9/16
14.3 1/2
12.7 125
5/8
15.9 9/16
14.3 140
3/4
19 5/8
15.9 160
7/8
22.2 3/4 19
190
1
25.4 7/8
22.2 220
1-1/4
31.8 1-1/8
28.6 285
b) Inserting the wire into the book
There are two methods for inserting the wire into the book. First, prep the
book by removing the back cover and place it on top of the front cover. This
will position the binding edge of the wire at the inside cover at the back of the
book.
+
The traditional way to insert the wire is to place the book on the edge of a
table so the holes overhang the table a slight amount. Make sure the covers
are facing down when placing the book on the table. lnserl the narrow loop
into the holes of the book with a slight rotating action. Start with the left side
and slide your finger along the wire to thread it into the remaining holes.
+
The wire holder option is also used for inserting a wire. Place the wide loop
(1) of the wire under the lip of the wire holder. Take the book with the covers
in the correct position (covers on top)(2) and place the book onto the narrow
loops of the wire.
.
Summary of Contents for OD 3500
