43
9. Follow steps 5 to 1 in reverse order to reinstall the
screen and close the unit.
Figure 100. Re-installation
XVers Units
1. Release the four snap fasteners to remove the front
cover panels from the unit. Remove the panels and
place them aside.
2. Remove the 5/16" Phillips screw that secures the
swing panel.
Figure 101. XVers Panel Removal
3. Remove the power and communication harnesses
attached to the back of the touchscreen.
4. Remove the touchscreen rear cover.
Figure 102. Harness Removal XVers Units
5. Disconnect the antenna wire from the Wi-Fi module.
ANTENNA WIRE
Figure 103. Antenna Wire Removal
6. Remove the Wi-Fi module from the touchscreen.
WiFi MODULE
Figure 104. Wi-Fi Module Removal
Summary of Contents for Raypak Raymote
Page 47: ...47 Notes...
