10
Add a New Heater to Raymote
1. "Check your Device" screen will appear. Ensure to
have the heater powered and Wi-Fi signal available
in the area, then press "Ready" button. See
Figure
14
.
Figure 14. Check your Unit
2. In Android
: Depending on your configuration, one
or more devices will appear on the app. Select the
HOTSPOT identifier that matches the unit's display
as shown in
Figure 15
.
Figure 15. Connect with Android Smart Phone
3.
In iPhone:
Raymote app will start to scan nearby
Heaters. If you have multiple units ready to connect,
stand closer to the unit you want to connect first.
Press "Join" to select the displayed heater that
matches the HOTSPOT identifier, or press cancel to
start again the process.
Figure 16. Connecting with iPhone
4. The "Wi-Fi setup" screen will appear. Select or enter
the Wi-Fi network you want your unit to be connected
to and enter the network password. See
Figure 17.
5. Press the "Continue" button to proceed with unit
connection.
Figure 17. Wi-Fi Setup
IMPORTANT:
Raymote Wi-Fi module works with 2.4GHz
Wi-Fi signals only.
Ensure to have a strong signal near the Heater, the Wi-Fi
password and to use a 2.4 GHz network.
(IEEE 802.11, 802.11b/g/n/ax).
Summary of Contents for Raypak Raymote
Page 47: ...47 Notes...
