34
s 4HE50MODECAUSESTHE)##TODOTHEFOLLOWING
2ESETSTHE)##FROMANYACTIVEPROTECTIONLOCKOUT
mode
2ESETSTHEMINUTEANTISHORTCYCLETIMER
%NERGIZESTHEUNITWITHOUTACALLFORUNITOPERATION
s )FTHEMINUTEANTISHORTCYCLETIMERORSECOND
MINIMUMRUNTIMERISACTIVEAFLASHINGhCvORh#vIS
DISPLAYEDONTHEDUALSEGMENT,%$S ANDACALLFOR
unit operation is present, UP mode causes:
!hCvTODISPLAYMOMENTARILYONTHEDUALSEGMENT
display
4HECOMPRESSORWILLSTART
4HEDISPLAYWILLCHANGETOASTEADYhCvORh#vTOSHOW
the current call for unit operation.
NOTE:
If a call for unit operation is present at
the end of UP mode will cause the unit to continue to
operate.
s )FNOCALLFORUNITOPERATIONISPRESENT50MODECAUSES
!STEADYhCvAPPEARSONTHEDUALSEGMENT,%$S
4HECOMPRESSORWILLSTART
4HECOMPRESSORWILLTURNOFFAFTERSECONDS
NOTE:
Entering UP mode without a call for
unit operation will cause the compressor to run
5-seconds.
INSTALLATION
Test and Fault Recall Modes
Test and Fault Recall Modes
Fault Recall Mode (UP and Select Buttons)
s %NTER
FAULT RECALL
mode by pressing the
UP
and
Select
buttons at the same time with insulated probes
FORTHREE SECONDSANDRELEASE
s 7HENENTERINGANDEXITING&!5,42%#!,,MODETHE
FC will be displayed.
s 7HENENTERING
FAULT RECALL
mode, the ICC will
automatically scroll through stored faults on the dual
7-segment LEDs.
s %ACHFAULTISDISPLAYEDONETIMEWITHTHETOPRIGHT
hand segment of the dual 7-segment display activated
between faults.
s %ACHFAULTISDISPLAYEDWITHTHEMOSTRECENTFAULT
displayed first.
s !MAXIMUMOFSIXINDIVIDUALFAULTSCANBESTORED
s !MAXIMUMOFTHREECONSECUTIVEIDENTICALFAULTSARE
stored.
s !hvWILLBEDISPLAYEDWITHNOFAULTSARESTORED
s 4HE)##WILLAUTOMATICALLYEXITTHE
FAULT RECALL
mode after 10 seconds. Use UP and SELECT to scan
through faults.
)-0/24!.4
The ICC stores the previous two weeks of
history faults. The complete stored fault history cannot be
displayed using a conventional thermostat.
Clear Fault History (UP and Select Buttons)
s #LEAR&!5,4()34/29BYPRESSINGBOTH4%34AND
3%,%#4BUTTONWHILEFAULTISDISPLAYEDFORlVE
seconds with insulated probes and release.
Lower case “c”
Summary of Contents for RA17 Series
