MAN2100160 rel. 00 dated 05.11.2013 page no. 49 of 53 pages
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: [email protected]
exclusive property of rheavendors group
12.03.
yearly
dispensing system
products canister
powder aspirator drawer
silicone tubes
coffee brewer
pressure boiler
air break
12.04. out of order
temporary
definitive
replace the gasket at the base of the mixing bowl of the mixer;
remove the mixer motor fan by pulling it; replace the gasket of the
mixer motor shaft ;
disassemble the products canister from the machine; empty them,
disassemble them in their basic components and wash them
carefully as already described by chapter “12.02. monthly”;
disassemble the mixing bowls; pull out the extraction drawers (r);
wash them with plenty of lukewarm water;
make sure that the water transport tubes are intact and that they
have kept their transparency, replace them, if necessary;
- replace the three sealing rings (s) of the compression chamber
and lower piston guide;
- replace the upper and lower filters (t);
- check the state of the compression chamber;
disassemble the pressure boiler; separate the pressure boiler from
the solenoid valves block (u) and check the seal o-ring; clean the
instant and espresso outlet water circuits; check the third way of
the espresso valve drain by removing any trace of residue (v);
empty and clean the air break tank (z); carefully check the micro
switch functionality operated by the floater rod and make sure that
it can freely slide without any hindrance;
if the vending machine should be inactive for a long period, please
act as follows:
- perform the uninstall cycle (see 09.01.f.);
- detach the water and energy supply;
empty the liquid waste tray;
- empty and clean the product canisters;
- clean the internal and external surfaces by using a wet piece of
cloth;
- cover the machine by means of a cloth;
- store it in a sheltered place, at a temperature not below 5 °C, at
a relative humidity not above 80%;
if you should definitively set the vending machine out of
commission and provide for the disposal of some parts thereof,
after having carried out the operations above, disassemble the
vending machine by separating every single component and
subdividing the parts according to the nature of materials; the
applied symbol means that the components of the vending machine
shall be not processed as home rubbish, but delivered to the
collection points capable of recycling electric and electronic
equipment; refer to the 2002/96/EC Directive and to the relative
rules;
the complete text of the European directive about this specific
subject-matter is made available on the Internet site:
http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri
=CELEX:32002L0096:IT:HTML
r
s
t
u
v
z
Cino XS grande PRO and PRO VHO
by
