Issue No: SQCA1 2010
15
4.6.2. REPLACING CAMBER BAR
To replace the camber bar, please follow the steps below;
STEP 1: Remove both rear wheels
STEP 2: Release the 4 cap screws using a 5mm Allen key,
see image 14.
STEP 3: Turn the chair upside down and release the 4 cap screws using a 5mm Allen
key,
see image 15.
STEP 4: Ensure the 4 bolts used to adjust the camber bar in 4.6.1, remain tight. This
will maintain the correct position.
STEP 5: Remove the camber bar and spacers, whilst taking note of the spacer
positions.
STEP 6: Replace with NEW camber bar.
STEP 7: Position the camber bar so the distance between the end of the tube to the
clamp are identical either side,
see image 16.
STEP 8: Reverse steps 1-3 to complete the process.
STEP 9: Ensure screws are secure.
IMAGE 14
– STEP 2
IMAGE 15
– STEP 3
IMAGE 16
– STEP 7
WARNING! Ensure all screws are tight and secure. Failure to do this, could result
in personal injury or property damage.
WARNING! DO NO attempt to change the spacers in the clamp unless you have
permission from an authorised RGK dealer.
