background image

Issue No: SQCA1 2010 

1.  GENERAL 

 
This section provides important information regarding the user manual, product features, safety 
and the initial setup of the 

RGK

 wheelchair. 

 

1.1. SPECIAL WARNINGS 

 

Safety information as used in this manual, apply to hazards or unsafe practices which 
could result in death, personal injury or property damage.  

 

The information contained in this document is subject to change without notice.  For the 
latest user manual, please visit 

www.rgklife.com

 

 

As a manufacturer of wheelchairs, 

RGK

 endeavours to supply a wide variety of 

wheelchairs to meet many needs of the end user.  However, final selection of the type of 
wheelchair to be used by an individual rests solely with the user and his or her health 
care professional. 

 

 

RGK

 products are designed and manufactured for the use of 

RGK

 and 

RGK

 approved 

accessories.  Accessories designed for other manufacturers are not recommended for 
use with 

RGK

 products.

 

 

The serial number can be found on the underside of the frame, along with some useful 

RGK

 company information.

 

 

1.2. PRODUCT FEATURES 

 

The 

‘Club Sport A’ is a height adjustable sports wheelchair which can be used for a 

variety of wheelchair sports.  The rigid structure provides strength and stiffness in 
sporting activities, whilst maintaining flexibility of sizes for a variety of users.  

See Image 

1 for ‘Club Sport A’ features.  
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
WARNING!

 Please read the PROCEDURES section in this manual before attempting to 

use the features on this product. 

Image 1: Product features 

Adjustable rear 
and front seat 
height 

Adjustable back 
upholstery 

Adjustable seat 
upholstery 

Adjustable 
camber bar 
position 

Adjustable 
footplate position 

Removable front 
offence wings 

Summary of Contents for CLUB SPORT ADJUSTABLE























Reviews: