RGBlue LM4.2K2200G, Instruction Manual

Page: 46 / 53

Selecting the light intensity and lighting duration
1. Each time you press the UP button in the Flash Mode, the
light intensity cycles through H → M → L → H → … (No light
is emitted while the light intensity is being selected.)
2. Pressing and holding the UP button (approx. 1 sec.) cycles
the lighting duration through 1 sec. → 0.3 sec. → 1 sec. → …
Changing Flash Mode
lighting duration
Indicator blinking
Press & hold
Press and hold UP button(approx.1 sec.) in Flash Mode
changes the lighting duration between the two settings of 0.3
sec. and 1 sec. At this time, the indicator repeats the blinking
indications according to the selected lighting duration. See
the tables below.
Changing Flash Mode
light intensity
Indicator blinking
Single press
Each press of the UP button in the Flash Mode changes the
light intensity in the order of H → M → L → and so on. At this
time, the indicator repeats the blinking indications according to
the selected light intensity. See the tables below.
(No light is emitted while the light intensity is being selected)
3. After the battery is connected, the light intensity is initially
set to High and the lighting duration to 0.3 sec. Any settings
made by the user will be retained until the battery module is
disconnected from the light module.
Lighting duration Light intensity Image of blinking indications
0.3 sec.
High
Mid
Low
[ Table 1 ] Blinking indications in the Flash Mode
Lighting duration Light intensity Image of blinking indications
1 sec.
High
Mid
Low
[ Table 2 ] Blinking indications in the Flash Mode
➡︎
➡︎
46