RGBlue LM4.2K2200G, Instruction Manual

Page: 28 / 53

Product Features
The RGBlue Underwater Lighting System is a light source based
on a new concept specialized for underwater photography.
• Modulation system
1. The light source (Light Module) and power source (Battery
Module) can be connected and disconnected easily thanks
to an original bayonet construction.
2. Single module can be purchased additionally according to
the usage of the system.
• Backup waterproofing mechanism
Each module is given an independent waterproofing structure * to
eliminate the risk of water penetration during setting.
* Each module is provided with an IPX6 *1 -equivalent waterproofing
mechanism withstanding a water depth of 100 meters during
lighting (i.e. when the modules are connected). However,
remember that the modules cannot be connected or
disconnected under water.
2. The light source with high color rendering index is used to
reproduce highly natural colors.
02
-2
SNC
Color temperature 5000K / Color rendering index Ra95
02
-2 PC
Color temperature 4200K / Color rendering index Ra95
02
-2
Color temperature 5000K / Color rendering index Ra80
3. Light distribution is 100º, which is wide enough for video recording.
4. The maximum light intensity.
02
-2 SNC
2600lm
02
-2 PC
2200lm
02
-2
3000lm
A special condensing lens (standard accessory) can narrow the light
distribution from 100º to 60º for brighter illumination of the target.
• Simple operation
Only a couple of pushbuttons can control the switch ON/OFF,
4-step brightness control and non-step brightness control.
• Various safety mechanisms
Multiple safety circuits
*3
and an over-pressure valve is built in.
*1
IPX6 is a liquid ingress protection standard with which water projected in jets
from any direction shall have no harmful effects.
*2
The multi-shadow phenomenon refers to the shadows produced when a light
with multiple LEDs is used.
*3
High-temperature protection, over-charge protection, over-discharge protection,
over-current protection and short-circuiting protection.
• Light source optimized for photography
1. A COB (Chip On Board) type LED that emits light from a
single plane is used so the problems observed with multi-
LED type light source, such as multi-shadow phenomenon
*2
and light distribution irregularities, are eliminated.
02
-2 SNC SYSTEM02-2 SUPER-NATURAL COLOR
02
-2 PC SYSTEM02-2 PREMIUM COLOR
02
-2 SYSTEM02-2
28