RGBlue LM4.2K2200G, Instruction Manual

Page: 35 / 53

Notes on Waterproofi ng Specifi cations
• Each module is provided with an IPX6 * -equivalent waterproof
construction so that water does not penetrate it even when it gets
wet during connection or disconnection. However, note that a single
module cannot be soaked in water and that the modules cannot be
connected or disconnected underwater.
* IPX6 is a liquid ingress protection standard with which water
projected in jets from any direction shall have no harmful eff ects.
• Should the inner side of a module is moistened by water, wipe
the moisture completely away using a lint-free, dry cloth. If it is
moistened by salt water, wipe the salt water completely away using
a cloth moistened with fresh water and then dry it completely.
• If the electrical terminal of the Battery Module is short-circuited by
contact with salt water, it becomes temporarily unusable by the
function of the internal safety circuitry. If this happens, wipe it with
the method described above, dry it and then recharge the battery by
means of the AC adapter and charge plug to recover power.
• When the two modules are connected (ready for underwater use),
the withstanding water depth is 100 meters. The modules cannot
be used in a depth over 100 meters. However, remember that this
waterproofi ng is retained only when the user performs optimum
maintenance.
* The dedicated charge plug and AC adapter are not waterproof.
Be careful not to moisten them.
Withstanding water depth: 100 meters
35