RGBlue LM4.2K2200G, Instruction Manual

Page: 45 / 53

■
Setting the light to Flash Mode
※The power ON/OFF operations are identical to the Light Mode.
1. Press and hold the UP and DOWN buttons
simultaneously. When the indicator starts blinking, press the
UP button once.
2. The indicator stops blinking and lights steadily to indicate
that the power is ON. (The light module is in the Light Mode
when the power is turned ON.)
3. In this state, (power ON and light OFF), press and hold the
DOWN button until the indicator begins to blink (approx. 2 sec.).
CAUTION : This operation is available only using
the button on the main body. It cannot
be remote-controlled.
4. The indicator blinks with flash operation (light intensity and
lighting duration) as shown in the charts below. The color
of the indicator in the Flash Mode varies according to the
remaining battery power. This is the same as the Light Mode.
5. To return to the normal Light Mode, press the DOWN
button again. The indicator is on.
6. To switch the power OFF, press the UP and DOWN
buttons simultaneously.
Setting Flash Mode
Power ON (Light is extinguished) → Press & hold The DOWN
button → The indicator keeps blinking.
CAUTION :
Since the Flash Mode uses an infrared beam,
it may emit light in reaction to sunlight. Be
sure to connect an optical fiber cable before
switching the power ON.
Press & hold
Indicator blinking
45