RGBlue LM4.2K2200G, Instruction Manual

Page: 37 / 53

1. Remove the O-ring using the O-ring remover.
2. Check that the O-ring is free of dirt, foreign object, crack or
damage.
* If any irregularity is found, replace it with a brand-new
O-ring.
3. Clean the O-ring groove with a cotton swab, etc.
4. Apply special grease on the O-ring.
5. Attach the O-ring.
* Be careful not to damage the O-ring during attaching.
6. Check that the O-ring applying surface of the Battery Module
is free of foreign object and connect the modules.
37