RGB Spectrum Quadra, User Manual, Page: 131 / 132

TE C H N I C A L S P E C I F I C A T I O N S
Parameter Storage
350-7951 Quadra User’s Guide 123
.
. .
.
.
~
ADC gain and offset values for Red, Green, and Blue
channels
~
Brightness, Contrast, Hue, Saturation and Sharpness for each
of three possible input sources (RGB, DVI, YUV)
•
Image controls (Video)
— The following parameters are stored for
each video input:
~
Input signal source
~
Brightness, Contrast, Hue, Saturation, Filter settings, Aspect
Ratio, and Over/Underscan mode for each of three possible
input sources (Composite1, Composite2, S-Video)
•
Output channel — The following parameters are stored for each
Quadra output:
~
Gamma
~
Output sync source
~
Background pattern type
~
Background Red, Green, and Blue color values
•
Output timing values — The following timing values are stored for
each Quadra output:
~
Timing preset name and number
~
Horizontal front porch, sync width, back porch, and active
area (in pixels)
~
Vertical front porch, sync height, back porch, and active area
(in lines)
~
Horizontal and vertical frequencies
~
Sync format
~
Horizontal and vertical sync polarities
~
Scanning system (interlace/progressive)
~
Output reference mode
~
Aspect ratio
•
Image settings — The following parameters are stored for each
channel:
~
Enable
~
Source rectangle dimensions (X, Y, width, height)
~
Destination rectangle dimensions (X, Y, width, height)
•
Mapping — The mapping of inputs is stored for each channel.