RFL 9660
RFL Electronics Inc.
October 1, 1999
3-12
(973) 334-3100
A typical callback string is shown below:
\HATDT5551234\N\D\4
\H
This tells the RFL 9660 to hang up and wait 30 seconds.
ATDT5551234
This tells the RFL 9660 to tone-dial "555-1234."
\N
This tells the RFL 9660 to insert a carriage return.
\D
This tells the RFL 9660 to wait until carrier is detected or 60 seconds. If carrier
is detected, the RFL 9660 will pause 5 more seconds.
\4
This tells the RFL 9660 to repeat the string up to 4 times if carrier is not
detected
within
60
seconds.
\N
This tells the RFL 9660 to insert another carriage return.
Spaces are not permitted in a callback string.
To enter a callback string for any of the active passwords, use the following procedure:
1. Press
the
[C]
and
[ENTER]
keys.
The "LOCAL>" prompt will change to a "CONFIG>" prompt. This shows that the
RFL 9660 is in the configuration mode.
2.
Set a callback string by entering the following command, followed by the
[ENTER]
key. Do not include
any spaces in the callback string:
CB
space, password number, space, desired callback string
[ENTER]
For example, to have the RFL 9660 hang up and call the user at 555-1234 when Password #2 is
entered, you would enter the following command:
CB
2
\HATD5551234\N\D\4
[ENTER]
3.
Repeat step 2 for any other passwords that require callback strings. You can always add more callback
strings later if needed.
4.
To view all the callback strings you have set up, press the
[S]
and
[ENTER]
keys.
A list of all current configuration settings will appear on your display, as shown in
Figure 3-7. The callback strings you entered are listed at the top, next to their passwords.
If any callback string needs to be changed, re-enter it by repeating step 2.
5.
When all the callback strings you need are entered correctly, save them by entering the following
command:
CONFIG>
CS
[ENTER]
The RFL 9660 will send the following prompt to your terminal:
Are you sure? (Y/N) _