The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
RefGuide_U-routerNGW_v1.01.docx
Page: 52(
57)
14.11 Settings
The ‘
settings
’ endpoints provide a list of settings on the U-router NGW. Such as the serial port
speed and interface, USB power on/off and expansion port settings.
ENDPOINTS
GET /api/settings
POST /api/settings
You can use the
GET /api/settings
endpoint to retrieve a list settings on the system.
For example:
curl https://192.168.168.1/api/settings -u rfi:rfi123
Returns:
{
"settings": {
"console_mode": "0",
"usb_power": "1",
"mno_profile": "100",
"expansion_port": "riot",
"term_interface": "/dev/ttyS2",
"term_speed": "9600"
},
"status": "OK"
}
You can use the POST /api/settings to change the settings the system. The possible POST parameters
are:
console_mode
Used to determine what type of cable is used on the RS232
serial port to connect to the console port of the
Enterprise Router. Possible values are:
•
0
•
1
0 = Ethernet cable (default value)
1 = Cisco cross cable
usb_power
Used to switch the USB (5V) power on or off at the external
USB-B port. Possible values are:
•
0
•
1
0 = USB power OFF
1 = USB power ON
mno_profile
The profile that is set for use with the SARA R4 module on
the system. Possible values are:
•
100
•
17
100 is used for Europe and is the default value
17 is used for the Vodafone network
expansion_port
The mode in which the expansion port is operated. Possible
options are:
•
rpsw
•
riot
•
modbus
All other values will be ignored and result in the error:
String value for '{expansion_port}' incorrect
term_interface
This is the serial interface that is connected to the
terminal process monitoring the Console port of a connected
enterprise router.
