© 1996-2005 RF IDeas, Inc. All rights reserved
Get ID
This button is active when the ‘Disable Sending keystrokes as data’ is selected. Pressing this button,
while a proximity card is present on the reader, will read the card’s data and display the result in the field
next to the button.
Raw Data
This field will contain the number of bits read from the card (less the parity bits stripped) and show the
card’s data in hexadecimal format.
Filter Mask
If the Filter Mask field is empty, the program will try to ‘guess’ at the format for the card. Since there are
literally thousands of formats, this truly a guess.
Facility Code
The Facility Code will represent the decimal equivalent of the bits defined by an ‘F’ in the Filter Mask.
ID Code
The ID Code will represent the decimal equivalent of the bits defined by an ‘I’ in the Filter Mask.
Enable Output as Hexadecimal
This checkbox allows the user to select a hexadecimal keystroke data output as opposed to the standard
decimal.
Read only cards with this bit count
No data is sent from the device unless the bit count is matched. The total bits received from the card
must match this bit count, parity bits included. If you select this checkbox and set the field for 26, the
reader will only respond to 26 bit cards.
Read only cards with this bit count
No data is sent from the device unless the bit count is matched. The total bits received from the card
must match this bit count, parity bits included. If you select this checkbox and set the field for 26, the
reader will only respond to 26 bit cards.
