17040952—ENG
2/12
Starting...
Thermostat is in the process of connection to the heater
Ambient probe error Room temperature sensor thermostat damaged
Fault code XXX
There is an anomaly or a lockout on the heaters – code XXX
Comm. error
There is a communication error between thermostat and heater
Error ID XX
Faulty interpretation of information sent by heater to the thermostat
The most frequently used functions by the user are available in the main menu. It is possible to quickly browse
through the pages.
The first time or after a reset, the
language
menu
appears on the display.
By pushing OK you confirm the selection.
Through the SETTING MENU this choice can still be changed later.
Then the
current
time
can be entered.
The buttons on the left allow you to select the menu – the buttons on the
right allow you to change the values.
Push the OK button to validate. The ESC button allows you to continue
without making changes to the time settings.
MAIN
SCREEN
Following items are shown on the main screen :
‐
the day of the week (intermittent if not updated)
‐
the current time (intermittent if not updated)
‐
the temperature measured (measurement every 10sec)
‐
an icon indicating the function of the active thermoregulation
(automatic, manual, summer or standby)
Automatic
Temperature control environment
according to the weekly program
set by the user. Program seen as a
graph of the current day.
Manual
Temperature control environment in
accordance with user‐selected temperature
(thermostat function)
Summer
Temperature control environment
disable. Summer ventilation can be
activated manually.
Standby
Temperature control environment disable.
(no frost protection)
In automatic mode, the chronothermostat performs the temperature control program as set for the current day. The
graph is visible at the bottom of the display.The graph is divided into time intervals of 15 minutes, corresponding to a
pixel horizontally and appearing in the four programmable temperature levels.
Near the icon of the operation mode, other icons may appear, meaning following.
Indicates that heater is turned on (the size of the symbol depends on the modulation level of the flame
Lockout of the heater
Fault
?
Connection icon symbol (if no icon appears)
(P.S : if heater is in standby mode and has no problem, no icon will appear)
In addition, under
the room temperature
indication, a text may
be shown providing
some information as
shown next
Remark : please consult the thermoregulation documentation for detailed description of the fault codes.
ITALIANO
FRANCAIS
ENGLISH
NEDERLANDS
DEUTSCH
