REYNAERS 062.8251, Technical Manual

Page: 8 / 54

8
3 “Standard” Control modes are defined:
3 Outputs are available on the Cable Dock to select between these modes:
 OCS Control: “Open-Close-Stop”. This is an operation with impulse
functionality. You press the button once and it will open, press again and it
will stop, press again and it will close.
 HTR Control: “Hold-To-Run”. This is a dead man’s button, as long as the
operator pushes the button it will either open or close. This operation mode
must be used with vent weights above 400 kg.
 Lock Control: When the button is connected to this output, the button
will only control the electrical lock. This control mode is needed during
installation.
For these 3 standard control modes one single button is connected to the motor.