Copyright
©
2020, REYAX TECHNOLOGY CO., LTD.
6
RYS8830 RYS8833
`GNSS Module Software Guide
COMMAND
Default: Key in <CR><LF> at the end of all Commands.
1.
Automatic backup data save ON/OFF
Syntax
Response
@ABPT <arg 1>
[ABPT] Done
This command is used to setting the interval of the automatic backup data save function.
The unit is“minute” and the value from 1 to
1,440 min can be set (default value: 60min) .
This command must be issued at Idle state and the automatic backup data save function
disabled.
Please take account to the life of the flash memory when using this function.
Argument:
Field
Description
arg 1
Set the interval of the automatic backup data save. The unit is minute
(default value is 60min) .
2.
Automatic backup data save ON/OFF
Syntax
Response
@ABUP <arg 1>
[ABUP] Done
This command is used to control the automatic backup data save function.
When “1” is specified for the argument, the backup data contents are saved in the flash
memory automatically at the first fix (This save is not executed if the time specified by
@ABPT has not elapsed since the last save). Then the backup data contents are saved in the
flash memory automatically with specified interval set by @ABPT beginning at the first fix.
For information about the backup data, see “@BUP”.
This command must be issued at Idle state. When this command is issued at Exec state,
error is returned. When the automatic backup data save is executing, the sentence may be
output erratically sometimes.
Please take account to the life of the flash memory when using this function.
Argument:
Field
Description
arg 1
Control automatic backup data save function.
0: OFF (default value).
1: ON.
