Copyright
©
2020, REYAX TECHNOLOGY CO., LTD.
7
RYS8830 RYS8833
`GNSS Module Software Guide
3.
Output sentence select
Syntax
Response
@BSSL <arg 1>
[BSSL] Done
This command is used to select the NMEA sentence to be output.
The sentences are assigned to
each of the bits of the argument. “1” is set for the bits of
the sentences which are to be output, and “0” is set for the bits of the sentences whose
output is not required. Arguments can be specified in decimal or hexadecimal notation.
With hexadecimal no
tation, add ‘0x’ in front of the numeral.
Argument:
Field
Description
arg 1
Output NMEA sentence
bit0 : GGA
bit1 : GLL
bit2 : GSA
bit3 : GSV
bit4 : GNS
bit5 : RMC
bit6 : VTG
bit7 : ZDA
bit8 : Reserved
bit9 : Reserved
bit10 : Reserved
bit11 : Reserved
bit12 : Reserved
bit13 : Reserved
bit14 : Reserved
bit15 : Reserved
bit16 : Reserved
bit17 : Reserved
(Default value: 0x000000EF)
4.
Backup data save
Syntax
Response
@BUP
[BUP] Done
This command is used to save the backup data. The backup data contents are saved in the
flash memory.
The backup data saved in the flash memory is automatically restored at boot-up from
power OFF.
The receiver position, ephemeris, almanac, TCXO offset and other information required for
hot start are included in the backup data, and by saving the backup data in the flash
memory using this command, hot start can be initiated when the system is booted from
