Copyright
©
2020, REYAX TECHNOLOGY CO., LTD.
3
RYS8830 RYS8833
`GNSS Module Software Guide
QUICK START GUIDE
Search mode select
A click of Cold/Warm/Hot button in command control area of GNSS monitor will start to fix position. Please move
to Idle mode and assert Cold start in case of changing search mode.
It is possible to input a command directly from a command input window.
Hot start
: @GSR
Warm start : @GSW
Cold start : @GCD IDLE
mode : @GSTP
Command input procedure
In the case of use communication terminal software other than a GNSS monitor, positioning operation will be
started if a command is inputted below.
It is required to key in “enter” or “
\r\
n” in the end of all Commands.
Ex.) Baud rate : 115200bps, Normal mode, GPS search mode, Cold Start
@GSTP (Set IDLE Mode)
@CSBR **** (Set UART Baud rate)
9600 : 9,600bps
38400 : 38,400 bps
115200 : 115,200bps
@GSOP 1 1000 0 (Set Operation mode)
@GNS 0x** (Set search mode)
01
: GPS
02
: GLONASS
03
: GPS+GLONASS
@GCD (Cold start)
Please change the operation mode in IDLE mode. And after changing operation mode, please execute Cold start.
