7-10
Connections and Interfaces
IndraControl L40
DOK-CONTRL-IC*L40*****-PR03-EN-P
Number of outputs
8
Connection method
2-wire connection
Output type
•
Semiconductor outputs,
non-saving
•
Protected,
with
automatic
restart
•
Current-carrying
Electrical isolation from U
S
No
Electrical isolation from U
L
Yes
Output voltage, nominal value
24 V
Rated output current:
Nominal value
Maximum value according to DIN EN 61131-2
1-signal
0-signal (leakage current)
UL-Rating:
General Purpose
Tungsten
0.5 A
≤
0.6 A
2 mA ... 0.6 A
≤
0.5 mA
0.5 A
5 W
Maximum total current of outputs
2 A
Parallel connection of outputs
Yes, but only within one
terminal
Output delay time
< 500
µ
s
Contactor size (at 1 Hz)
SG1 (6.2 W)
Lamp load (at 8 Hz)
5 W
Switching frequency
With ohmic load
With inductive load
100 Hz
Function (contactor)
Overload protection:
•
Typical current level,
causing switch-off
•
Minimum current level,
causing switch-off
•
Automatic restart with reduced load
1.2 A
0.6 A
After approx. 10 msec
Overload indicator
Red collective LED for all 8
outputs
Voltage reduced on circuit interruption in the
nominal operating mode
Electronically limited to
(Vext
–
50 V)
Typ. 26 V
Reverse voltage protection
Ensured without connected
load
Supply voltage according to EN 61131-2
24 V DC
Open-circuit power consumption from U
S
Typ. 50 mA
Cable length (unshielded)
< 100 m
Fig. 7-16:
Data of digital outputs
Buy: www.ValinOnline.com | Phone: 844-385-3099 | Email: [email protected]
