Rexnord Falk A, Owner'S Manual

Page: 34 / 44

Modifications for Non-Standard Mounting Positions
Instructions
For non-standard mountings, modify drives as illustrated below
and on Page 35 to assure satisfactory lubrication. For
applications that exceed the limits shown, drives that are both
rotated AND tilted and drives with backstops, consult Factory.
CAUTION: Inadequate lubrication will cause damage.
When replacing a pipe plug (P) with a street elbow (E), insert the
plug in the elbow (E/P). When replacing a pipe plug (P) with a
street elbow (E), pipe nipple (N) and a pipe cap (C), discard the
pipe plug. Kits consist of parts for an oil expansion chamber.
Pipe fittings and kits tabulated on Page 35 are available from
Rexnord. Pipe fittings may also be purchased locally. Use
galvanized pipe fittings.
Remove all pipe plugs and coat them and the added parts, with
Permatex #3 or equivalent to prevent leakage. Install parts as
illustrated to suit the mounting position. The air vent must be in
the top of the drive or in the kit standpipe. Fill drives with oil to
the level indicated by the letter “L” in the following drawings.
Rexnord Industries, LLC 3001 W. Canal St., Milwaukee, WI 53208-4200 USA
378-200 (PN-2128394)
Telephone: 414-342-3131 Fax: 414-937-4359 November 2010
e-mail: info@rexnord.com web: www.rexnord.com Supersedes 6-07
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
5107 = STD 5115 = .375 E/P
5203 & 5207 = KIT 0786775
5215 thru 5315 = KIT 0786776
5107 = STD 5115 = .375 E/P 5203 thru 5315 = STD
5107 = 5-12° STD
5107 = 13-20° .375 E/P
5115 = .375 E/P
5203 & 5207 = KIT 0786775
5215 thru 5315 = KIT 0786776
5107 = .375 E/P 5115 = .375 E/P
5203 & 5207 = KIT 0786775
5215 thru 5315 = KIT 0786776
5107 = KIT 0738540 5115 = STD
5203 = .375 E/C & .375 X 1.00N
5207 = .375 E/C & .375 X 2.00N
5215 = .500 E/C & .500 X 2.00N
5307 = .500 E/C & .500 X 2.50N
5315 = .500 E/C & .500 X 2.50N
5107 & 5115 = STD
5203 = .375 E/C & .375 X 1.00N
5207 = .375 E/C & .375 X 1.50N
5215 = .500 E/C & .500 X 1.12N
5307 & 5315 = .500 E/C & .500 X 2.00N
5107 = .375 E/C &
.375 X 3.00N
5115 = KIT 0786775 5203 = .375 E/C & .375 X 1.00N 1.50N
5207 = .375 E/C & .375 X 1.00N 1.50N
5215 = .500 E/C & .500 X 1.12N 1.50N
5307 = .500 E/C & .500 X 1.50N 2.00N
5315 = .500 E/C & .500 X 1.50N 2.00N
5107 & 5115 = KIT 0738540 5203 = .375 E/C & .375 X 1.50N
5207 = .375 E/C & .375 X 2.00N
5215 = .500 E/C & .500 X 2.00N
5307 = .500 E/C & .500 X 2.50N
5315 = .500 E/C & .500 X 2.50N
3 O’Clock — CW Rotation
6 O’Clock — CW Rotation
9 O’Clock — CW Rotation
12 O’Clock — CW Rotation
3 O’Clock — CCW Rotation
6 O’Clock — CCW Rotation
9 O’Clock — CCW Rotation
12 O’Clock — CCW Rotation
5 to 20° CW Rotation – Sizes 5107 & 5115
10 to 20° CW Rotation – Sizes 5203 thru 5315
5 to 20° CCW Rotation – Sizes 5203 thru 5315
10 to 20° CCW Rotation – Sizes 5107 & 5115
Standard Drive Mounting Limits
The standard drive rotation limits from the
basic 3, 6, 9 & 12 o’clock mounting positions
are given in Section
I
, Page 4. For higher
limits, follow the instructions at the left and the
drawings below. (6 o’clock illustrated)
CODE
B — Bushing N — Nipple
C — Cap P — Pipe Plug
E — Street Elbow STD — No Modifications
L — Oil Level
Horizontal Drive Modifications 20° Max. Drive Rotation
CW CCW
5-15° 16-20°
Appendix F
•
Falk™ Quadrive Shaft Mounted Drives Model A
(Page 34 of 44) Sizes 5107-5315