11
EMBEDDING THE HOT TUB IN A TERRACE
•
If the hot tub kit is embedded in the terrace, the specifications in this instruction manual and
the EN 17125 standard must be given special attention.
•
All REXENER hot tubs can be embedded in a terrace as desired.
•
When embedding a tub, take into account that the base for the hot tub kit has been designed to
an appropriate height.
•
The borders of the hot tub must remain at least 15–20 cm from the terrace’s surface. When
installed this way, the edges of the insulation cover have enough room to fit in place.
•
The hole made in the terrace must be at least 1,900 x 1,900 mm to allow the hot tub to fit easily
into place.
•
When embedding a REXENER Silence hot tub, the space needed for the wood stove must be
considered.
•
The wood stove must be separated from the terrace’s wooden parts, and safety distances must
be taken into account.
•
In connection with REXENER Aurora/Polar hot tubs, take into account the protective case that is
assembled on the hot tub’s side. The bottom of the protective case must be at the same level as
the hot tub’s base. Safety distances must also be observed when installing the protective case.
•
When embedding the product in a terrace, it is very important to ensure that there are no access
obstacles for servicing and heating the protective case (REXENER Polar/Aurora) and wood stove
(REXENER Silence).
•
Take into account the installation of hoses used for draining the hot tub, and the access to the
eventual draining tap.
