Band knife machine R750/R1000 – Instruction manual
Page
43 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
Check if the machine is properly placed.
Machine first start up consists of checking the correct operation of
individual control elements on the machine, and making sure that the cutting
band moves properly (the correct direction of movement, no vibrations, the
movement of the band is in a straight line, at an equal distance from the guide
bearings).
6.4.
N
ECESSARY STEPS BEFORE NORMAL START
-
UP
Normal machine start-up is a situation when the machine is turned on
once a shift or once a day (24 hours), but not less than a month of inactivity.
Before each start-up one has to:
Check if the machine has any signs of damage, in this case stop any
work on the machine and inform personnel responsible for machine
maintenance and management.
DANGER
WARNING!!!
It is forbidden to use a machine showing signs of damage.
Check if the space around the machine is sufficient for safe
operation.
Check if all the machine covers are in place.
Check all safety devices safety door switches and the emergency
stop buttons and the drive motor brake
Visually check the machine components looking for possible
problems or signs of damage
Visually check structural integrity of cables in particular main power
cable for any signs of damage. In case damage is noticed stop working on
the machine immediately.
