Band knife machine R750/R1000 – Instruction manual
Page
59 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
Pic.7 Band knife sharpening device
Steps to sharp the band knife:
Put down the presser foot (6) (Pic.2 p.38) in maximum down
position,
Turn on the machine with maximum band cutting speed.
Pull arm (1) slowly towards front and left side. The arm controls
sharpening device. Then the sharpening stones (2) will start to sharp
the band, hold the arm in this position for a few seconds. If the band
is new, hold arm as long as it get sharp cutting edge.
Release arm (4.1) (the arm will go back to its position).
