Band knife machine R750/R1000 – Instruction manual
Page
40 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
5.2.
M
ACHINE STATE SIGNALS
Current machine state is shown on the control panel buttons.
5.3.
M
ACHINE MODIFICATIONS
Any changes to the machine without the risk awareness causes a serious
threat to life and property. All consequences of such actions will not be covered
by warranty and service support.
DANGER
WARNING!!!
Never change or install any machine elements, in particular those
responsible for safety, ie. covers, locks (magnetic safety switches),
emergency stop buttons and others.
Modification of the machine can lead to serious risks!
Any changes to the machine without the risk awareness causes a serious
threat to life and property. All consequences of such actions will not be
covered by warranty and service support.
5.4.
M
ACHINE SAFETY FUNCTIONS SCHEME
Electric scheme is included as separate attachment.
5.5.
E
LECTROMAGNETIC COMPATIBILITY
Due to the fact that all machine components related to the possibility of
generating electromagnetic disturbance and those components which could be
affected by this disturbance have been assembled and started in accordance
with the manufacturers recommendations and Directive 2014/30/EU one can
assume that:
The electromagnetic disturbance generated does not exceed the level
above which radio and telecommunications equipment or other
equipment cannot operate as intended.
It has a level of immunity to the electromagnetic disturbance to be
expected in its intended use which allows it to operate without
unacceptable degradation of its intended use.
