Band knife machine R750/R1000 – Instruction manual
Page
32 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
4.
M
ACHINE SET UP
4.1.
S
ETTING UP THE MACHINE
4.1.1.
Machine assembly conditions
The machine is intended for use in a production plant. The machine
should be operated in conditions of the production hall, at a temperature above
10 ° C, with a humidity not exceeding 70% without condensation. The floor
should enable stable installation of the machine in the workplace and have
adequate load capacity. It is recommended to install the machine on an
industrial type of floor.
4.1.2.
Required space for use and maintenance
The machine can only work in a place that provides freedom of movement for
the operator. The space around the machine should be marked in accordance
with the health and safety rules.
WARNING
It is recommended to always analyze the hazards connected with the location
of the machine, take into account the risk of tripping, slipping or hitting against
the machine components. It is necessary to limit the possibility of accidents by
using non-slip floors, protective footwear with a sole that provides good grip
and procedures related to the way the floor is cleaned around and under the
machine.
Risk of tripping, slipping or hitting against the machine components.
