GB-32
Assembly
STEP 3
STEP 4
Assembly
1. Connect the cables (55L + 111) and (44R + 112) (see
Fig. 4-1 or 4-2).
2. Mount the left/right handle (52L + 52R) to the hand-
lebar support tube (10). First use the washer (71),
then the cover (23L), the washer (8) as well as the
screw (40) for fi xation (see Fig. 4-1 / 4-2).
3. Now pull the pulse sensor cable of the handgrip (81)
up through the hole in the handlebar support tube
(10).
4. Next, screw the handgrip with two screws (9) and
one washer (6) as well as one spring washer (7) each
to the handlebar support tube (see Fig. 4-3).
WARNING
1. Release the screws of the drink bottle holder from
the handlebar support tube (10) (see Fig. 3-1).
2. Now push the cover (49) over the handlebar support
tube (10) (see Fig. 3-2).
3. Connect the upper computer cable to the lower com-
puter cable (29 + 30) (see Fig. 3-3).
4. Push the handlebar support tube (10) with cover
(49) onto the main frame (1). Make sure not to pinch
the computer cable.
5. Now fasten the handlebar support tube with four
Allen screws (9) as well as one washer (6) and one
spring washer (7) each to the frame (see Fig. 3-4).
6. Push the cover over the screw connection.
WARNING
REX_Trainer_FX401E_13.indd GB-32
REX_Trainer_FX401E_13.indd GB-32
08.05.13 09:49
08.05.13 09:49