GB-22
Assembly
Assembly
The Functional Trainer can be used at home as well as during
travels.
A Assembly with carabiner/Anchor strap
1. Sling the anchor strap (2) several times around the ob-
ject.
2. Clip on the carabiner (1) for safety (see Fig.).
B Assembly with door anchor
Positioning the door anchor
1. Use only doors that open out away from you.
2. Place the counter support of the door anchor (9) centred
behind the door (see Fig.).
3. Close the door and lock it for safety, if possible.
4. Carefully put your weight on the anchorage before begin-
ning with your workout (see Fig.).
Make sure that the training surface slip and enough
space around the device. we recommend a radius of at
least about 1–1.5 meters. Remove all sharp objects in
addition in the vicinity.
WARNING
Make sure beforehand that the anchorage object will
with stand your weight. Danger of breakage and accident!
We urgently recommend you wind the anchor strap
around the anchoring object several times to prevent
slippage. The straps may not be twisted or knotted. Risk
of accident!
DANGER
The Functional Trainer may only be fastened to solidly
constructed doors. Do not use sliding doors, glass doors
or light cabinet doors for the assembly. Make sure that
the door will withstand your weight. Danger of breakage
and accident! The straps may not be twisted or knotted.
Risk of accident!
DANGER
REX_Trainer_Functional.indd GB-22
REX_Trainer_Functional.indd GB-22
08.05.12 09:55
08.05.12 09:55
