M10
Re:system
31
Defining the main room
With the Main Room softkey, you
switch the state of the main room
(M51 or M10*) between:
Included (On)
Included (Off)
Not Included
Included (On)
The main room is actively switched
on when the scene is called. Source
and volume are defined in two steps.
Included (Off)
The main room is actively switched
off when the scene is called.
Not Included
The room is not an active element of
the scene It retains its current status.
The number of active zones and rooms
is shown in the centre of the display.
*
In the case of an M10 installation, the
speaker integrated in the M10 is defined
as the main room.
Defining additional rooms
You change the status of the
additional room between Yes and No
with the Rooms softkey. The
assignment is done by zone. You
select the required zone or room
through the Zone and Select softkeys.
Yes: The additional room is actively
switched ON or OFF when calling the
scene. The individual setting for the
corresponding room is done in Step
2.
No: The additional room is not an
active element of the scene. It retains
its current status.
- : This additional room is not present
in the Multiroom system and
therefore cannot be defined.
Once all additional rooms have been
defined, this fact can be confirmed
with the OK softkey.
