M10
Re:system
19
M10 Setup
A PC or a Notebook is always needed
for the initial configuration of the
M10, which is connected to the M10
using the RS232 interface
or the
USB socket
.
Using the M230 Revox program of M-
Scope (Display view), the main menu
shown below for the M10 setup can
be called with the setup key.
The Setup menu appears as follows,
if the Multiroom module is installed:
Ethernet Setup
The Ethernet setup is reached
through the Ethernet softkey. All the
settings that are needed for the
integration of the M10 in a LAN are
done on 2 configuration pages. The
first menu page shows you a Client
List of all devices that are currently
accessing the M10.
