M10
Re:system
15
Ethernet interface
The Ethernet interface enables the
M10 to be integrated into a LAN. In
this way, each computer that is also
integrated in the LAN can access the
Revox system, using the corresponding
Revox control software.
PDAs
or
Tablet PCs
are also suitable as
control devices, which enable a
wireless connection with feedback. For
this purpose, you need an additional
Access Point
or
WLAN Router
for the
radio transmission, as shown in the
Figure
Function Plan
on Page 19.
The corresponding M230 or M231
control softwares can be found on the
Revox Homepage.
As well as operation through the Revox
service programs, the M10 also offers
the option to influence the Revox
Multiroom System and/ or to let
feedback messages be directed
specifically into a visualisation, through
the use of a primary (domestic) control
system.
The programmer can get a simple
access to the Revox system through a
UDP protocol (Revox M-Text / M-XML
protocol).
A further tool that is supported by the
M10 Ethernet interface is the M233
Display for Display panels in visualised
domestic controllers.
The following page gives you an initial
overview of the M-Text and M-XML
protocol.
Please visit the Download area on
the Revox Homepage for further
information.
