6
6
6
6
Revolabs Solo
™
Executive Base Station
1. Channel LED indicators: Displays
microphone and pairing states
8. Mini-Phoenix Connectors: Audio in and out
connections (8 channels in, 8 channels out)
2. Diversity Antennae: Two sets
9. Pairing LEARN Button and Signal LED: For
pairing Charger Mute to Base Station
3. Pairing Push Buttons: For pairing
microphones to Base Station
10. Local/remote selector switch
4. Muting Antenna
11. USB and Ethernet Ports (
Future use
)
5. Power On LED
12. Mini-Phoenix Connectors: Multi-base
station (
BUS
) synchronization connector
6. On/Off Switch: Powers up unit
13. System Mute function switch
7. Power In Receptacle (AC In)
14. DB25 Control Port (Parallel IO Port)
Installation
The Revolabs Solo™ Executive Base Station is usually installed into a standard 19” AV rack system
using the supplied rack ears and standard rack screws. The equipment requires 110-220V AC, 50-
60 Hz, power. Plug the power cord into an appropriate outlet and turn the circuit breaker-protected
power switch on the back panel to
Reset
. The GREEN power LED on the front panel will illuminate.
Attach the four diversity antennas (two on each side) and the system mute antenna (SMA male
connector) in the center.
4
1
3
2
6
7
8
10
11 12
13
9
14
8 Channel System shown
