10
10
10
10
1
2
3
5
6
4
The Revolabs Solo™ TableTop Wireless Boundary Microphones enable multiple conference
participants to use a single microphone. Units are placed strategically on the conference table to
ensure that all participants can be heard clearly - without wires getting in the way or limiting the
distance to the speaker unit.
1. Mute button — press to mute, un-mute and pair microphone.
2. LED display — visual status for mute, un-mute, and pairing.
3. Integral grille — protects internal parts (non-removable).
4. Audio jack — accepts a 2.5mm plug for a powered speaker.
5. Charging port — docks to all Solo battery charger units.
6. Rubber feet — non-slip, vibration absorbing pads.
The Revolabs Solo™ XLR Microphone Wireless Adapter is connected to your existing handheld
dynamic microphones for wireless freedom during open mic meetings, Q&A sessions, classrooms,
etc. No more duct taping wires to the floor to prevent accidents.
1. Mute button — press to mute, un-mute and pair microphone.
2. Rubber collar — durable and impact/strain protection.
3. XLR connector — balanced audio for dynamic microphones.
4. LED display — visual status for mute, un-mute, and pairing.
5. Audio Out port — 2.5mm, unbalanced.
6. Power/Charging Port — docks to all Solo charge stations.
Charging the Batteries
How to Charge
1. Place microphone(s) into the Revolabs Solo™ Executive Charger Base.
2. During charging, the LED indicator turns on (RED) and remains on until charging completes. The
microphones are muted while in the Charger Base. In normal use, batteries should fully charge in
about 2 hours, and can be “quick-charged” to 80% capacity in 45 minutes.
3. When charging completes, the LED turns off and the microphone is ready for use.
4. Microphone(s) left in the Charger Base will periodically show a RED LED indicating a top-up
charge. This happens frequently and is completely normal. The battery is 99% charged.
Note:
A fully charged module battery provides approximately 8 hours of talk time.
1
2
4
3
6
5
