background image

XII.  LIABILITY & WARRANTY:

WARNING!!! The installer is responsible for any leaks resulting from installation of tubing or related fittings. THE INSTALLER MUST CHECK 

OVER THE ENTIRE SYSTEM COMPLETELY WHILE UNDER PRESSURE TO ENSURE SYSTEM IS NOT LEAKING AND FUNCTIONING PROPERLY. 

Liability resulting from failure to check for leaks under pressure is the sole responsibility of the installer.

WARRANTY

Warrantor guarantees, to the original owner, that the Reverse Osmosis Drinking Water System, when installed and maintained in 

accordance with the instructions, will be free from defects in materials and workmanship for a period of one year from date of installation. 

If, within the first year, a part proves, after inspection, to be defective, Warrantor will, at its sole option, either replace or repair the part 

without charge except normal shipping and installation charges. Labor to maintain the equipment is not part of the Warranty. Filters and 

membranes, which are expendable, are not covered by the Warranty.

This Warranty applies only while this product is in use in the United States or Canada.

GENERAL PROVISIONS

The above warranties are effective provided the Reverse Osmosis Drinking Water System is operated at water pressures not exceeding 

80 psi, and at water temperatures not exceeding 100°F; provided further that the Reverse Osmosis Drinking Water System is not subject 

to abuse, misuse, alteration, neglect, freezing, misapplication, neglect, alteration, water pressure spikes, accident or negligence; and 

provided further that the Reverse Osmosis Drinking Water System is not damaged as the result of any unusual force of nature such as, but 

not limited to, flood, hurricane, tornado or earthquake. Warrantor is excused if failure to perform its Warranty obligations is the result of

strikes, government regulation, materials shortages, or other circumstances beyond its control.

*THERE ARE NO WARRANTIES ON THE REVERSE OSMOSIS DRINKING WATER SYSTEM BEYOND THOSE SPECIFICALLY DESCRIBED ABOVE. 

ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, ARE 

DISCLAIMED TO THE EXTENT THEY MIGHT EXTEND BEYOND THE ABOVE PERIODS. THE SOLE OBLIGATION OF WARRANTOR UNDER THESE 

WARRANTIES IS TO REPLACE OR REPAIR THE COMPONENT OR PART WHICH PROVES TO BE DEFECTIVE WITHIN THE SPECIFIED TIME PERIOD, 

AND WARRANTOR IS NOT LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. NO WARRANTOR DEALER, AGENT, REPRESENTATIVE, 

OR OTHER PERSON IS AUTHORIZED TO EXTEND OR EXPAND THE WARRANTIES EXPRESSLY DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied Warranty lasts or exclusions or limitations of incidental or consequential 

damage, so the limitations and exclusions in this Warranty may not apply to you. This Warranty gives you specific legal rights, and you 

may have other rights which vary from state to state. This Warranty applies to consumer-owned installations only. This Warranty does not 

cover any equipment that is relocated from the site of its original installation.

© 2016 All Rights Reserved.

LIT-RO300600-M 06/28/16

RO-300G-600G_manual.indd   12

6/28/16   3:57 PM

Summary of Contents for RO-300G













Reviews: