Appendix
Operating instructions RLD 119
ELTROPLAN
-
REVCON
Elektrotechnische Anlagen GmbH
10
REVCON
®
product overview
1.
REVCON
®
RHD
Power feedback units for continuous operation
(Engine test beds, escalators, wind energy plants, elevators etc.)
2.
REVCON
®
RFE
Power supply- and feedback unit
For multiple motor applications with dynamic alternation of loads)
3.
REVCON
®
HSTV
Boost-converter for the generation of an increased direct current link voltage for the torque
increasing in over- synchronous range of speeds
4.
REVCON
®
RSU
Step- up converter for the generation of a current controlled, high
output voltage from a
lower input DC voltage.
5.
REVCON
®
RSD
Step- down converter for the generation of a decreased
output voltage from a higher DC
voltage (AC output is also possible).
- Voltage controlled: A free selectable output voltage in wide limits
The required output voltage can be adjusted by set-point (0 ... 10V)
- Current controlled: A lower output voltage that adjusts free in dependence of the load
The required output current can be adjusted by set-point (0 ... 10V)
6.
REVCON
®
EDC
Power supply module for multiple motor applications (supply of multiple drive controller)
without generator- operation
7.
REVCON
®
RHF
Filter module for the generation of sinusoidal line currents (THD I 5-16% according to the
frequency converter and the load). Filter module of the newest generation with smaller di-
mensions and reduced weight and better performance
All products are available for 400V line voltage, the most also for 230V, 400V, 460V,
500V, 600V and 690V! According to the product power from 4 to 440kW can be transmit-
ted, whereby the most products are appropriate for parallel connection, so that power ratings
until the megawatt range can be achieved!
