DIRECTIONS FOR USE
DRAINING TANKS TOWARDS SHOWER TRAY
Bring the Litoo Shower in bed system to a shower tray then open the both draining valves (from fresh water tank and waste
water tank).
When the water does not pass by any more tilt slightly the shower in bed to the back to empty totally the remainder of
water.
Both tanks must be totally drained to ensure that no water stagnates inside.
NOTE : Close the valves after the tanks have completely drained.
DRAINING TANKS TOWARDS TOILET
Proceed as follows:
1 °) Position the drain flexible hose of evacuation from the outlet (n°17) in the lavatory pan.
2 °) Link the suction flexible hose on the draining hose of waste water tank.
3 °) Position the button to the mode " draining towards toilet ".
4 °) Open the red valve of the draining pipe. (The picture above shows the red valve in the closed position)
5 °) Switch on the suction pump until the complete draining of the waste water tank and pipes.
After draining, proceed in an inverse way:
6 °) Switch off the suction pump.
7 °) Close the red valve of the draining pipe.
8 °) Position the button to the mode "suction".
9 °) Remove the suction flexible hose of draining pipe outlet.
11/16