SuperCleanox Operating instructions
Page
30
of 62
14.8 Carbon electrode
14.8.1 90° for marking/labelling
Use the 90° carbon electrode supplied in conjunction with the white felt
for marking/ labelling.
14.8.2 60° for cleaning and polishing
Use the 60° carbon electrode supplied in conjunction with the yellow felt
for cleaning and polishing:
surfaces
or long smooth fillet welds
For thin fillet welds, we recommend our 30° carbon electrode.
See price list. (Item No.: EP-02-002)
Tip
Do not use the carbon electrode for cleaning or polishing sharp-edged
components or complex contours.
For this work, use the brush only.
14.9 Surface cleaner (optional for SuperCleanox VI HD)
For cleaning, rust removal and passivation of large stainless steel surfaces
such as tanks,
silos, façades, etc.
For efficient cleaning, the surface cleaner requires the highest energy output,
it can therefore only be used optimally in conjunction with the VI
SuperCleanox HD.
Use with the SuperCleanox VI is limited.
Welds should first be cleaned with a carbon fibre brush.
More information can be found in our general catalogue!
