SuperCleanox Operating instructions
Page
15
of 62
Passivation
Inactivation of oxidation processes on the workpiece surface through chemical
treatment.
Marking/Labelling
Is a targeted oxidation process in the metal surface
No superficial application of colour particles.
Permanent and forgery-proof!
By means of a marking electrolyte and electrical current, information is
transferred permanently from a template onto the surface of the workpiece.
All electrically conductive metal surfaces can be labelled using the
appropriate electrolyte.
Marking templates
Contain the information that is transferred by means of the marking tool,
marking electrolyte and electrical current onto the surface of the workpiece.
Marking stamp
The combination of carbon electrode handle and the marking felt attached to it.
Water hardness
The mineral content of the water determines the degree of hardness.
The higher the concentration of certain minerals in the water, the higher the
degree of hardness.
The hardness grade is measured in "degrees of German hardness"
[° dH, deutscher Härte].
6
Delivery, in-house transport, unpacking
The complete appliance set is delivered in a sturdy Euro plastic box.
This box is secured with a lead seal in our factory before shipment.
The lid can only be opened by destroying and removing the lead seal.
In addition, the lid latches are secured on both sides with cable ties to prevent
accidental opening.
Safety information
All necessary activities concerning delivery, transportation and storage must
be strictly carried out with the utmost care and comply with all safety rules and
regulations.
Non-compliance with the safety rules and regulations can lead to serious cuts,
bruising and fractures.
6.1 Delivery
The appliance set is delivered by a carrier or parcel service in orange
Euro plastic boxes on pallets.
!
