To Reset to Factory Default
a. Disconnect power from the unit
b. Press and hold # key whilst powering the unit back up
c. On hearing two “Di” release # key, system is now back factory settings
NOTE: note only installer data is restored, user data will not be affected
Anti Tamper Alarm
7KHXQLWXVHVD/'5OLJKWGHSHQGHQWUHVLVWRUDVDQDQWLWDPSHUDODUP,IWKHNH\SDGLVUHPRYHG
from the cover then the tamper alarm will operate.
Sound and Light indication
Detailed Programming Guide
1. User Settings
4
Operation Status
Red Light
Green Light
Yellow Light
Buzzer
Power on
-
Bright
-
Di
Stand by
Bright
-
-
-
Press keypad
-
-
-
Di
Operation successful
-
Bright
-
Di
Operation failed
-
-
-
DiDiDi
Enter into programming mode
Bright
-
-
In the programming mode
-
-
Bright
Di
Exit from the programming mode
Bright
-
-
Di
Open the door
-
Bright
-
Di
Alarm
Bright
-
-
Alarm
To enter the programming mode
* Master code #
999999 is the default factory master code
To exit from the programming mode
*
Note that to undertake the following programming the master user must be logged in
To change the master code
0 New code
New code
#
#
The master code can be 6 to 8 digits long
Setting the working mode:
Set valid card only users
Set valid card
and
PIN users
Set valid card
or
PIN users
Entry is by card only
Entry is by card and PIN together
(QWU\LVE\HLWKHUFDUGRU3,1GHIDXOW
3
0
#
3
1
#
3
2
#
