The unit operating as a Wigeand Output Reader
In this mode the unit supports a Wiegand 26 bit output so the Wiegand data lines can be
connected to any controller which supports a Wiegand 26 bit input.
Keypad Lockout & Alarm Output options.
If there are 10 invalid cards or 10 incorrect PIN
numbers in a 10 minute period either the keypad will lockout for 10 minutes or both the alarm
and the inside buzzer will operate for 10 minutes, depending on the option selected below.
7RGLVDEOHGRRURSHQGHWHFWLRQ)DFWRU\
GHIDXOW
7RVHWWKHDODUPRXWSXWWLPHPLQXWHV
Factory default is 1 minute
7
6
0
#
To enable door open detection
6
1
#
Alarm output time
5
0
̚
3
#
Normal status: No keypad lockout or
DODUPIDFWRU\GHIDXOW
7
0
#
)
actory default setting
Keypad Lockout
7
1
#
Alarm and inside buzzer operate
7
2
#
To remove the alarm
To reset the Door Forced Open warning
Read valid card
or
Master Code #
To reset the Door Open Too Long warning Close the door
or
Read valid card
or
Master Code #
