To Add a
card
and
PIN
user
7KH3,1LVDQ\IRXUGLJLWVEHWZHHQ
& 9999 with the exception of 1234 which
LVUHVHUYHG
To change a
PIN
in card and PIN mode
0HWKRG1RWHWKDWWKLVLVGRQHRXWVLGH
programming mode so the user can
undertake this themselves
To change a
PIN
in card and PIN mode
0HWKRG1RWHWKDWWKLVLVGRQHRXWVLGH
programming mode so the user can
undertake this themselves
Door Open Too Long (DOTL) warning.
When used with an optional magnetic contact or built-in
magnetic contact of the lock, if the door is opened normally, but not closed after 1 minute, the
inside buzzer will beep automatically to remind people to close the door and continue for 1
minute before switching off automatically.
Door Forced Open warning.
When used with an optional magnetic contact or built-in magnetic
contact of the lock, if the door is forced open, or if the door is opened after 20 seconds ,the
inside buzzer and alarm output will both operate. The Alarm Output time is adjustable between
0-3 minutes with the default being 1 minute.
To delete a
Card and PIN
user just delete
the card
To set door relay strike time
Master code # 4
0
̚
99
# *
*
0-99 is to set the door relay time 0-99 seconds
Door Open Detection
6
To add a
card and PIN
XVHULQFDUGDQG3,1PRGH
Add the card as for a card user
Press to
exit from the programming mode
Then allocate the card a PIN as follows:
The operating is the same as adding and deleting a
card user in
*
* Read card 1234 # PIN # PIN #
* Read Card
Old PIN #
New PIN #
New PIN #
*
ID number #
New PIN #
Old PIN #
New PIN #
2
User ID
#
To Add and Delete a
card
user
2
0000
#
To unlock the door
For a
PIN
user
Enter the PIN then press #
For a
card
User
Read card
For a
card and PIN
user
Read card then enter PIN #
1
#
3
To add a
card
XVHULQFDUGPRGH
0
#
3
2
#
3
To delete
ALL users
. Note that this is a
dangerous
option so use with care
To delete
All users
Relay Output Delay Time
2. Door Settings
