10
5.3.1 Installa
tion
1.
Use the cameras main bracket to mark out the x 4 mounting holes and cable
connector’s entry hole on the chosen location of the wall (Fig. 1).
Drill 4 x 5mm holes for the mounting
bracket’s wall plugs and 1 x 20mm
hole for the Camera’s video and
power plugs to pass through the
wall.
Note: It is r
ecommended to pass the
cable into the property as close to the
Camera as possible to reduce the
chances of any exposed cables being
tampered with. If you choose to run
the cable along the wall outside the
property, it is recommended to use cable conduit to hide the cable and reduce the
chances of it being tampered with.
2.
Screw the post bracket to the main housing and tighten the nut until secure (Fig. 2).
Now pass the Cameras video / power lead through the main bracket and then secure
the lower part of the post on to the main bracket (Fig. 3).
Feed the video/power leads through the hole in the wall, starting with the largest
connector, and then mount the main bracket on to the wall using the fixing screws and
wall plugs.
Mark out the single cable entry hole
in the central position in relation to the
4 x Camera Bracket Mounting Holes
4 x Camera Bracket
Mounting Holes
Fig
. 1.
Fig. 2.
Fig. 3.
